|
ROOF SPECIALIST - REVIVE-A-ROOF cleaning systems uses an innovative chemical cleaning process that treats algae as a pest not as a stain. Their process only uses 45 PSI on any roof, this prevents loss of color and damage to barrel tile roofs. |
|
Their 3-in-1 process cleans your roof, kills all existing algae and leaves behind a residual-spore block inhibitor that allows algae spores to roll off your roof. |
|
Revive A Roof was identifed during the Hamlet Residential Survey conducted in January 2005 and received a residential rating of 4.5 |
|
Revive A Roof specializes in roof cleaning but their process works just as well on any outdoor surface that requires cleaning. |
|
Their process differs from high pressure cleaning in a few ways. High pressure uses approximately 3,000 Pounds of Pressure per Square inch (PSI) using approximately 7 gallons of water per minute. |
|
High Pressure water cleaning is using pressurized water to displace the algae and dirt. |
|
Revive A Roof low pressure system uses a two step method. The first step uses a chemical process that kills the algae. The second steps rinses the surface with 45 PSI of water at 20 gallons per minute. |
|
This process will clean and seal your roof and does not require the technician to walk over every inch of the roof, thus reducing the potential for broken tiles. |
|
There process includes steps to protect all surrounding plants and vegetation. They guarantee their work for 1 year. The roof should look good for up to 2.5 years. |
|
Thy have been in business for 10 years and have 2 fully outfitted trucks. Please call for a free quotation or demonstration. |
|
|
|
|
|
|
|
|
|
|